Ring Terminal
Jan/080
Ring Terminal
Electric Equipment, Tools, Meters
 |
 2000 NEW 3M 94717 25 29 27 Butted Ring Tongue Terminal  US $99.00
|
 Panduit 8 Stud Ring Tongue Terminal 8AWG QTY 200 NEW US $9.99
|
 5 bags of 50 Thomas Betts T18 10R Ring Terminals NIB US $1.49
|
 TnB Sta Kon 1 4 Ring Tongue Terminal for 22 16AWG QTY1K US $9.99
|
 Ring Tongue Terminal 2 0 AWG 5 16 STUD 50 pcs MOLEX US $64.92
|
 12 10 AWG Electrical 3 8 Stud Ring Terminal 50 Pcs US $9.99
|
 12 10 GAUGE INSULATED 10 RING CRIMP TERMINAL QTY 50 US $3.49
|
 50 Yellow Ring Terminal Connector 12 10 Wire 3 8 Std US $5.00
|
 Ring Terminal Battery Boot Cover 2 to 2 0 Gauge Wire US $1.59
|
 Ring Terminal Battery 5 16 Eyelet 1 0 AWG Tinned Lug US $1.59
|
 10 Big Bare Battery Copper Ring Terminal 1 0 Wire 5 16 US $11.95
|
 50 Bare Ring Lug Terminal Connector 8 Wire 3 8 Stud US $15.25
|
 500 RING CRIMP WIRE CONNECTOR TERMINAL 14 12 1 2 13mm US $12.60
|
 50 Blue Ring Terminal Connector 16 14 wire 5 16 Stud US $4.25
|
 25 pcs 3M BLUE HEAT SHRINK RING TERMINALS 10 STUD WIRE US $6.99
|
 20 Pieces 4 1 4 RING U I Electrical Connector Terminal US $9.00
|
 100 Blue Nylon Ring Terminal Connector 16 14 Wire 1 4 US $8.75
|
 25 pcs 3M RED HEAT SHRINK RING TERMINALS 10 STUD WIRE US $6.99
|
 10 Big Battery Ring Terminal 1 0 Wire 5 16 Plated US $12.95
|
 22 18 GAUGE INSULATED 8 RING CRIMP TERMINAL QTY 100 US $3.49
|
 22 18 INSULATED 1 4 RING CRIMP CONNECTOR TERMINAL 100 US $3.99
|
 LOT 3 Packs of 100 10 Ring Terminals 12 10 784553 US $4.99
|
 10 Big Bare Battery Copper Ring Terminal 4 Wire 3 8 US $6.00
|
 Ring Terminal Battery 3 8 Eyelet 4 Gauge Tinned Copper US $1.09
|
 25 Non Insulated Ring Terminal Connector 8 AWG 7 16 US $7.50
|
 50 High Temperature Ring Terminal 22 18 Wire 1 4 Stud US $4.00
|
 100 Yellow Ring Terminal Connector 12 10 Wire 5 16 Std US $9.75
|
 25 pcs 3M YELLOW HEAT SHRINK RING TERMINAL 5 16 STUD US $8.50
|
 THOMAS BETTS STA KON 18RA 10 RING TERMINAL 100PK US $14.99
|
 16 14 GAUGE INSULATED 10 RING CRIMP TERMINAL QTY 100 US $3.69
|
 25 pc 3M BLUE HEAT SHRINK RING TERMINAL WIRE 5 16 STUD US $6.99
|
 Ring Terminal Battery 3 8 Eyelet 2 Gauge Tinned Copper US $1.19
|
 Ring Terminal Battery Boot Cover 8 to 2 Gauge Wire US $1.59
|
 Ring Terminal Battery 5 16 Eyelet 4 Gauge Tinned Copper US $1.09
|
 6 AWG Ring Terminal Nylon Insulated Blue 3 8 4 Pack US $2.20
|
 6 AWG Ring Terminal Nylon Insulated Blue 1 4 4 Pack US $2.20
|
 Ring Terminal Battery 3 8 Eyelet 1 0 AWG Tinned Lug US $1.59
|
 Ring Terminal Battery 3 8 Eyelet 6 Gauge Tinned Copper US $.99
|
 100 16 14 INSULATED 3 8 RING CRIMP TERMINAL CONNECTOR US $5.49
|
 16 14 GAUGE UN INSULATED 10 RING TERMINAL QTY 100 US $3.49
|
 LOT 1000 INSULATED RING CRIMP WIRE CONNECTOR TERMINAL US $8.95
|
 25 pc 3M BLUE HEAT SHRINK RING TERMINALS 3 8 STUD WIRE US $6.99
|
 25 pc 3M BLUE HEAT SHRINK RING TERMINALS WIRE 1 4 STUD US $6.99
|
 25 pcs 3M YELLOW HEAT SHRINK RING TERMINALS 1 4 STUD US $8.50
|
 12 10 GAUGE INSULATED 3 8 RING CRIMP TERMINAL QTY 100 US $6.49
|
 12 10GA 8 M4 YELLOW RING PARTIALLY INSULATE TERMINALS US $.99
|
 12 10GA3 8” M9 YELLOW RING PARTLY INSULATED TERMINALS US $.99
|
 16 14GAHD10 M5 RING YELLOW BLACK TERMINALS AMP TYCO US $.99
|
 22 18 GA 3 8 M9 RING SOLISTRAND UNINSULATED TERMINALS US $.99
|
 22 18GA 10 M5 RED RING PARTIALLY INSULATED TERMINALS US $.99
|
 22 18GA6 RED RING PARTIALLY INSULATED MOLEX TERMINALS US $.99
|
 Box 10 NAPA 4 Gauge 1 4 Ring Terminals 721138 US $2.29
|
 100 pcs RED RING TERMINALS 22 18 GAUGE WIRE 1 4 STUD US $1.99
|
 100 Molex Ring Tongue Terminal 2 AWG 1 4 Stud Plated US $86.79
|
Car audio amplifier is a tool that plays music inside a car. This amplifier is not a built in tool. That means you will not get it while buying a car. You have to buy it separately and have to install it in your car. Installing this has some specific procedures. Here you will some basic instructions about how to install a car audio amplifier.
First, you have to disconnect the terminals. This is not mandatory but this is just for safety reason. Now, you have to run the power cable to the amplifier from the battery. You have to find a ground point. It has to be closer to the amplifier. Make sure that the point is attached to the frame of the vehicle. The connection also has to be solid.
Run your power cable to the amplifier just as you have done with the power cable. If your ground point has any color, then remove it. Use a sandpaper to do this job. You can use it also to remove any rust. The connection will not be solid if the metal is not shiny. If you want to attach a ring terminal with the ground point, then this is the right time to do that. After this you have to wrap up the ground point with something that is non conducting. Then use some spray paint or any kind of finish that will protect the ground point from rust.
Do not forget to turn on the remote and to run the RCA cables. You have to pull out the head unit out of the mounting location. Fasten the remote turn on wire with the wiring harness of the head unit. Now, decide which amplifier will contain which RCA cable. Keep the RCA cables away from any type of power cables. Keep them away especially from the amps power cable.
Now, let all the wires of the speakers run. Fasten the wires with the amplifier. After this turn the remote on and add the power to the ground. Attach the fuse holder. Always attach it near the battery. If your battery terminals are very sophisticated, then do not forget to give proper protection and connect them in the right way. Attach the other cables with the battery. It will be better if you can get your battery terminals a brand new cover.
Before turning on the amplifier, check it properly. Turn the gain of the amplifier down. After that turn your system on and listen carefully. Check whether everything is working properly or not. Listen to the sound carefully. Think whether you can hear any noise or not, and verify how much noise you can hear. Verify whether there is any distortion exists that is audible. If everything is completely all right, then move on to the next step.
Your next step is to think how you will give power to the amp, where your amp will stay, etc. With that your amplifier will be fixed perfectly. If you follow all these steps then you will be able to install your amplifier safely and properly.
About the Author:
Victor Epand is an expert consultant for used DVDs, used movies, and used car stereos. You can find the best marketplace for used DVDs, used movies, and used car stereos at these sites for used DVDs, used movies, and Audio amplifier, RCA cables, speakers, batteries.
Article Source: ArticlesBase.com - How To Install A Car Audio Amplifier
Great Trains: The circus comes to town
There are no I-Touches, cell phones, or other electronic devices.