Stripper Cable
Stripper Cable
Electric Equipment, Tools, Meters
![]() Yellow Black Plastic Handle Cable Stripper Cutting Tool US $9.42
|
![]() UTP STP universal cable stripper cutter for RJ11 RJ45 LAN Phone wire Cat6 Cat5 US $2.99
|
![]() COASTEL CABLE TOOLS CABLE STRIPPER SET US $250.00
|
![]() Eclipse Tools 200 009 — Rotary Cable Slitter Stripper US $23.99
|
![]() NIP Wire Stripper Cable Cutter Variety Size Crimper Hardware Knife Tool Nice sA US $6.29
|
![]() RJ45 Cat5 Punch Down Network Phone LAN UTP Cable Cutter Wire Stripper 1046 US $.16
|
![]() 6 Wire Size Cable Crimping Tool Automatic Wire Stripper US $9.94
|
![]() Paladin Cable Cutters Greenlee Tools 1916 Wire Strippers Cutters New US $59.80
|
![]() Co ax cable CABLE pvc STRIPPER 10 LOT US $.99
|
![]() Ideal 45 121 T Stripper Wire Stripper and Cable Cutter NIB US $.99
|
![]() Gray V Block Coaxial RG Cable Wire Stripper Cutter US $4.79
|
![]() Gray Plastic Wire Stripper Tool for Coaxial RG Cable US $4.85
|
![]() UTP STP Round Flat Wire Cable Stripper Cutter Tool US $5.94
|
![]() Network Wire Cable Punch Down Stripper RJ45 Cat5 LAN UTP Cable Cutter 1046 US $.01
|
![]() NIP Wire Cable Cutter Knife Hardware Stripper Variety Sizes Crimper Tool Nice sU US $6.59
|
![]() Coaxial Cable Strippers Made in West Germany Used US $19.95
|
![]() Paladin 9 1 4 Cable Cutters Greenlee Tools 1916 Wire Strippers Cutters New US $18.80
|
![]() DRILL OPERATED POWERED CABLE WIRE STRIPPING STRIPPER MACHINE SCRAP COPPER $$ US $92.95
|
![]() DRILL OPERATED POWERED CABLE WIRE COPPER RECYCLING STRIPPING STRIPPER MACHINE US $89.95
|
![]() CABLE STRIPPER WIRE STRIPPING MACHINE COPPER RECYCLE US $94.95
|
![]() New Hardware Knife Wire Stripper Cable Cutter Variety Sizes Crimper Tool Nice pO US $6.49
|
![]() Flat Wire Stripper Round Network Cable Cutting Tool US $6.46
|
![]() Blue Handle Carbon Steel Jaw Wire Cable Stripper Crimping Tool US $23.14
|
![]() Greenlee 1960 Pro Wire Stripper Pliers for NM Cable with Cushion Grip US $9.99
|
![]() BRAND NEW GARDNER BENDER WIRE STRIPPER PUNCHDOWN TOOL SPD 10L CABLE CUTTING US $17.95
|
![]() Cable Wire Striping Cutter Stripper Pliers Hand Tool US $13.48
|
![]() N Electrician Cable Wire Cutter Automatic Stripper Tool US $8.99
|
![]() Dual Blade Gray Plastic Coaxial RG Cable Stripper US $4.89
|
![]() Multi Function Tool Wire Stripper Cable Crimping Tool US $9.42
|
![]() Coaxial Cable Stripper CCTV CATV Tool RG 58 RG 59 RG 6 US $4.99
|
![]() Automatic wire stripper cutter crimper cutting cut strip cable crimp terminal US $17.98
|
![]() 2012 1 BRAND MEGA BEE WIRE STRIPPERCABLE STRIPPING COPPERSCRAPRECYCLEDIY US $1,395.00
|
![]() 110v FACTORY DIRECT COPPER CABLE SCRAP WIRE STRIPPER STRIPPING MACHINE SAVE $ US $995.95
|
![]() DRILL OPERATED POWERED CABLE WIRE STRIPPING STRIPPER MACHINE SCRAP COPPER $$$$ US $92.95
|
![]() Co ax cable CABLE pvc STRIPPER 4 strippers US $.99
|
![]() Used Battery operated coax cable stripper US $25.00
|
![]() 1905 GREENLEE ADJUSTABLE CABLE STRIPPER US $125.00
|
![]() 2012 NEWEST MANUAL CABLE WIRE COPPER RECYCLING STRIPPING STRIPPER MACHINE US $49.95
|
![]() New Knife Wire Hardware Stripper Cable Cutter Variety Sizes Crimper Tool Nice sR US $6.59
|
![]() Rotary Coaxial Cable Stripper Cutter Tool For RG59 6 58 US $2.07
|
![]() Ideal Cyclops Cable Stripper 45 514 Free Shippingreduced US $24.95
|
![]() Klien Tools Dual NM Cable Stripper Cutter Made in the USA Part 1412 US $10.50
|
![]() LOT of 5 3 CRIMPERS 1 FLAT RIBBON CABLE STRIPPER 1 HAND TOOL 514 5A US $16.50
|
![]() Automatic 3 in1 cable Wire Stripper Crimper Self Adjusting electricians cutter US $13.91
|
![]() Ideal 45 515 Thinnet Toggle Cable Stripper US $13.25
|
![]() PK NEUSES N 2878 Cable Sheath Stripper Tool NEUSE US $9.99
|
![]() Vintage Magic Cable Stripper From DLW Inc Anaheim California US $7.95
|
![]() Klein Tools K1412 Klein Kurve Dual Non Metallic Cable Stripper Cutter US $9.99
|
![]() Antislip Handle 02 08mm Wire Cable Cutter Stripper US $7.61
|
![]() New Wire Stripping Machine Cable Copper Stripper US $1,295.00
|
![]() 993 640 Precision CABLE CUTTER STRIPPER AWG 10 22 Wire US $8.68
|
![]() COMBO PACK WIRE STRIPPER CABLE STRIPPING MACHINE US $299.00
|
![]() 2012 FACTORY DIRECT COPPER CABLE SCRAP WIRE STRIPPER STRIPPING MACHINE SAVE $ US $1,395.00
|
Cut the chase angling the chisel the direction you want it to cut.
Make your channel just wide and deep enough to accommodate the cable. If you are fitting a flush-mounted socket, cut out a recess about 7-8mm deeper than the backing box. Fix the box is place using screws and wallplugs.
An easy way to cut a recess for the backing box is to first loosen the brickwork by drilling a number of closely spaced holes and then taking out the excess with your chisel.
Thread a length of cable into the channel and secure it every 300mm with cable clips. Knock out one of the cable entry blanks, add a grommet, and feed the cable into the backing box of each outlet. Strip the cable, bare the wires and attach them to the terminals on both sockets.
To repair damaged areas, load your plaster on to a small board and stand near the wall. Pick up a small amount of plaster on a filling knife and press it hard into the channel.
Once the damaged area has been filled, place a timber straightedge across the face of the wall and move it slowly backwards and forwards in a sawing motion. Work up and down the wall so that the plaster is smoothed off neatly. Sand any ridges when it is dry.
An alternative to channeling is to use plastic conduit.
Start by fitting the backing box in place using impact adhesive or plugs and screws. Then measure and cut the backing pieces to length - use a junior hacksaw - and fix them into position.
Feed the cable into place making sure there are no twists or kinks (some manufacturers supply small clips which are spaced along the top of the conduit to hold the cable tightly. Lead the cable into both backing boxes, strip the ends and make the electrical connections to each socket.
Trim the conduit covers to lenth and snap them into place on top of the backing pieces (fit angled adapters as well, if supplied). Screw both faceplates into position, then turn the power back on at the mains.
Tip: Disguise plastic conduit by painting it the same colour as the skirting board or architrave it runs along.
Tip: When wiring the new socket (or fused connector) double over the end of each wire so that it is gripped more tightly (and safely) in the terminal.
Tip: When stripping cable. Start with the outer sheathing. Slit the sheath lengthways with a sharp penknife or trimming knife. Do not cut back too far. 75mm Should be more than adequate for most wiring. Peel back the sheathing like the skin of a banana and cut off the waste.
The best way to strip the live and neutral wires is with a dedicated wire stripper - a cheap, easy to use tool you can buy from any DIY store. At a pinch, you could cut around the insulation with a knife; but take extra care not to nick the wires. Don't use pliers- there are too difficult to control accurately.
NB: Please note you have to be a certified electrician to perform any wiring in the UK. This article is for curiosity porpoises only.
About the Author:
Johan Nickson is a Freelance
Power Tool
Consultant. Johan is
Dewalt
Expert and an avid
Rotary Hammer
with chisel action user.
Article Source: ArticlesBase.com - Wiring Sockets And Channeling Walls
Does anyone remember a movie about a woman running from a man trying to kill her with a wire hanger?
I remember a couple of scenes. One where the woman (blonde) is leaving her daughter with a sitter/neighbor. She's saying something along the lines of "I'll be back for you and I love you". Another scene is where the villain in the movie is choking another lady w/ a hanger. I believe she was a stripper or a lady of the night. The blonde woman (main character) is also. The only other scene I remember is the blonde lady wearing a purple dress, running through the streets of some bad area from the man that is stalking her with the intent to kill her with the hanger. He could be a pimp, stalker, crazy boyfriend or all. I don't know. This movie was made in the 70's or 80's. If anyone can help me I would appreciate it!! I was too young to be watching it in the first place. I only saw it once, but it is still with me. My parents were asleep and I was watching late night cable. Once the movie ended, I remember not going to bed until daylight.
...I might be shooting from the hip, on this one, but what you describe sounds very much like some of the subplot contained in the disturbingly violent 1982 crime drama, called "Vice Squad"; actor Wings Hauser, playing a psychotic and despicatble character named Ramrod, does a lot of perverse and sickening things with a hanger wire, in this one...





















































